Good quality leather footwear can last you a long, if you care for them properly.
It is also very important to use high quality shoe care products if you appreciate the quality of your footwear.
A little bit of work and care to keep your leather shoes looking and working great!
> Always brush your shoes after the use which avoid settling any dirt on the leather.
> Wipe it with a soft and dry cloth if any moisture, but do not dry your shoes directly under the sun or close to a direct heat source.
> Allow air circulation for some time and then put a quality shoe tree (Beech wood shoe tree is an option) so that your shoes won’t lose its shape. Apply Leather conditioner and polish after every week of usage.
> Do not use the same shoes for more than two days, give it a rest and use your second pair. This way you can extend the life of your shoe.
> Avoid direct exposure of leather shoes during rain or on muddy places especially if the sole is leather. You can use a shoe cover or Galoshes if unavoidable. Shoes with rubber sole would be a better option during wet weather.
> At any circumstances if your shoes got wet, brush it and sponge with a soft and dry cloth, insert some old paper to absorb water. Allow air circulation for some time, insert a moisture absorbing quality shoe tree and don’t use it for a week so that the inner and stitches dry completely.
Note: – These are normal shoe care process, results may vary depends on the products and its handling.
How to polish your high quality leather shoe
> Brush your shoes thoroughly and wipe it with a soft and dry cloth (old t-shirt is an option). Use welt brush to clean the welt and corner area.
> Apply good quality leather cleaning solutions if there is excessive coat or stain but be careful as an improper application may damage the colour.
> Apply leather conditioner (MINK OIL RENOVATOR is an option) with a soft and dry cloth, allow at least 10 minutes to dry.
> Apply matching coloured cream polish with a small brush (APPLICATOR/WELT BRUSH) and after few minutes buff with a good quality soft brush (HORSE HAIR SHOE SHINE BRUSH is an option), allow at least 15 minutes to dry. Please remember that you do not need to apply coloured cream every time you polish.
> Apply good quality wax polish (BEES WAX POLISH is an option) with soft and dry cloth, allow 20 minutes to dry.
> Your shoe polishing job is done if you are not looking for a mirror finish.
> Apply wax polish again with a drops of water with clean, soft and dry cloth and repeat this procedure two or more times with at least 15 minutes gap after each application for a mirror finish.
Now you got a perfect finish
Note: – These are normal shoe polishing process, results may vary depends on the products and its handling.
Enhance your look with a well maintained, great pair of shoes.
Your footwear is always noticed by others, groom wisely if you care!!!